SDC-6 Transdermal Diffusion Cell Drive System


  • Modular design for system expansion
  • Set up for 6 sets of Side-by-Side Cells
  • Complete turn key system with Temperature control system (Water Heater / Circulator / Tank)

The Logan SDC-6 Transdermal Diffusion Cell Drive Console System is composed of:

  • SDC-6 Drive Console
  • Side by Side cell assemblies X 6 sets
  • Heater Circulator
  • Water tank

The SDC-6 Transdermal Diffusion Cell Drive Console is remarkably simple to use. Skin is mounted between the cell body (donor) and the cell body (receptor). The dermis is bathed from below with an isotonic saline solution injected through a port provided for that purpose.

Temperature is maintained at 37°C by thermostatically controlled water that enters the lower port of the water jacket and circulates out through an upper port. Warm water supplied and circulated by two (upper and lower) manifolds that are connected to a constant temperature bath.

Homogeneous distribution of temperature in the saline bathing solution is accomplished by the agitating motion of a Teflon-covered magnetic stirring bar, driven by an external magnet and mounted on a timing motor.


Power Requirements 110V—120V 50/60 Hz or 220V—240V 50/60 Hz
Side-by–Side Cell drive Positions 6
Control Zone 2
Zone 1: Side-by-Side Cell Positions 1-3
Zone 2: Side-by-Side Cell Positions 4-6
Stirring Method Teflon coated magnetic bar
Speed 50Hz: 500 RMP / 60 Hz:600 RPM
Heater 700 watts
Temperature Range 25~45°C
Temperature Accuracy 1°C