Fid station
Desk series

This unit, combining an LC series hydrogen generator and a ZEROAIR module, can supply H2 gas and zero air for FID detectors in Gas Chromatography. Hydrogen is produced using an electrolytic cell with polymeric membrane (PEM), no acid or alkaline solutions are used. The LC series features a desiccant cartridge that needs to be replaced or refilled only when saturated.

Zero air is produced by purifying the compressed air supplied by the laboratory’s compressed air system, bringing total hydrocarbon concentration below 0.05 ppm. Both sections, hydrogen and zero air, can be controlled from the same touch-screen LCD panel.

 Download Fid station Tech Sheet

Product Features

  • Available Flow-rates:
    100, 140, 180 cc/min (Hydrogen)
    1500, 3000 cc/min (Zero air)
  • Outlet pressure:
    up to 7 bars (Hydrogen)
    up to 6.5 bars (Zero air)
  • Hydrogen purity:
    >99.9995%
  • Drying system:
    Refillable molecular sieve column
  • Internal water tank:
    1.2 litres, with electronic level control
  • Dimensions:
    24x38x43(H) cm
  • Weight:
    < 15 kg
  • Certification:
    CE, ISO9001

Main Applications

  • Flame photometric detectors
  • Flame ionization detector feed gas (FID)
  • Total hydrocarbons analysers

Technical Specifications

Models LC.H2.100 LC.H2.140 LC.H2.180
General information
Electrolytic cell PEM technology
H2 purity >99.9995%*
Outlet pressure 7 Bar(101 psi)
H2 flow-rate cc/min 100 140 180
Communication
RS232 X X X
RS485 X X X
Software functions
Parallel mode capability NO
Automatic filling of water tank Optional
Fill canister function X X X
Water
Quality Deionized, ASTM II, <0,1uS
Supply Pressure (Min) 0.2 Bar (1,4 psi)
Supply Pressure (Max) 1 Bar (14 psi)
Supply Flow Rate (min, Max) 0,2 Lt/min, 1,5 Lt/min
Internal water tank 1,2 Lt
Electrical data
Power supply Connection type Min din 4 pole
Supply voltage 24VDC (from ZA module)
Installed power (Max) 90W 120W
Dimensions 24x29x31(H) cm
Net weight(water tank empty) 7Kg
Connections
Hydrogen outlet 1/8” compression fitting
Water Quick release push-in fitting

* Referred to O2, dew point < -55°C

 

Model: ZA.MINI.1500 ZA.MINI.3000
Air outlet
Flow rate (Max) 1,5 l/min 3,0 l/min
OUTLET pressure (Max) Pressure INLET – 0.5 Bar (8 psi)
Total hydrocarbon content < 0.05ppm
Start-up time 40 min 45 min
Compressed air inlet
Max inlet hydrocarbon content 100ppm
Min Supply Pressure 3 Bar (43psi)
Max Supply Pressure 10 Bar (145 psi)
Dew point < -20°C
Temperature (Min-Max) 1°C (34°F) – 35°C(95°F)
Communication
RS485 X
Electrical data
Connection type IEC320-C13
Supply voltage 100-240Vac 50/60Hz
Installation Power (Max) 240W (280VA)
Fuse Rating (5x20mm) 4A
Dimensions 24x38x12(H) cm
Net weight 7Kg 8Kg
Connections
Outlet port 1/8″ Female
Inlet port 1/8″ Female
Water purge 6mm(1/4) push fitting
Ambient data
Temperature 5-35°C (41-95°F)
Humidity
(Max, non condensing)
80% at 25°C (77°F)
Noise <25dB(A)
IP rating IP20