5350 Tandem PID/ELCD

Increase efficiency and save counter space with the Model 5350 Tandem Photoionization Detector/Electrolytic Conductivity Detector (PID/ELCD), a smartly designed instrument for dual detection of aromatic and halogen compounds.

 

The Model 5350 Tandem PID/ELCD packs in the power of two great detectors: Model 4430 PID and Model 5320 ELCD, removing the need for separate analyses of aromatic and halogen compounds. Its unique design eliminates transfer lines and uses only one detector port. Detectors can be used separately if desired. The 5350 Tandem PID/ELCD is compatible with most GC manufacturer’s instruments.

Model 5350 Tandem PID/ELCD Features:

  • Unique tandem design eliminates transfer lines and minimizes dead volume
  • Tandem detector design uses only one GC detector port
  • Patented UV Lamp Window Sweep™ design minimizes fouling from window surface contamination
  • Exclusive Lampsaver™ circuit can be programmed to turn PID lamp off after a specified period to improve lamp life
  • ELCD incorporates quick change, disposable deionizing resin cartridge, and a simplified solvent system
  • Reactor design uses brass and graphite/Vespel® ferrules instead of solid graphite ferrules
  • Programmable solvent venting through GC timed event
4430 PID Specifications
Dynamic Range > 106
Linear Range > 106
​Sensitivity​ > 40 pg Benzene
Maximum Operating Temperature 250 ˚C
Lamp Current 0–1.60 mA (in 9 steps)
Lampsaver Time 0.5–2 hr, reset by external contact
Patent The 4430 PID is protected under U.S. Patent number 4,804,846.
Gas Requirements Helium (99.999%)
Lamp Power Supply Power Requirements 105–240 VAC (±10%) 47–63 Hz
Lamp Power Supply Weight 2.5 kg (5.5 lb)
Lamp Power Supply Dimensions 5.75” H x 2.75” W x 9.0” D
 
5320 ELCD Specifications - Halogen Mode
Detectable Mass
Maximum*​  1 pg lindane
Maximum 5 µg lindane
Dynamic Range 5 x 106
Selectivity Cl/HC > 106 Cl/N > 10 Cl/S > 105
Reactor Temperature
Range 800 – 1,100 ˚C in 100 ˚C increments
Stability ± 1 ˚C
Solvent Flow Adjustable on the cell amplication board
Solvent Flow Range 0-200 µL/min
Solvent Vent Valve Controlled by GC-timed event relay
Gas Requirements H2 (99.999%) Halogen Mode
Detector Controller Power Requirements 90–260 VAC (±10%) 47-63 Hz, 200W
Detector Controller Weight 3.8 kg (8.4 lb)
Detector Controller Dimensions 8.25” H x 5.0” W x 12” D